Nylon com óleo

Chemical Designation: Polyamide 6

DIN Abbreviation: PA 6 G (cast)

Colour, Filler: Grey beige,


Stock Availability: Standard lengths 1 or 2 metres. Tube 0.5 or 1 metre long,

also cut to size

Rod 50 – 70 mm dia

Plate 10 – 160 mm thick

Tube 280 – 710 mm OD

Finished parts, machined or custom cast

Nylon com Oleo, Tecast L is a tough semicrystalline cast nylon with good machinability and lubrication additives for outstanding sliding properties.

Main characteristics: very good sliding properties

even in dry running conditions tough

good slip stick behaviour good thermal resistance

abrasion resistant good electrical insulation

resistant to many oils, easily machined

greases, diesel, petrol, …

  • Preferred Fields: Mechanical engineering, automotive engineering, transport and conveyor technology, gears, couplings and engine construction, textile, packaging and paper processing machinery, machine parts, agricultural machinery, printing machinery.

Applications: chain guides friciton bearings

friction strips gears

friction rings spindle nuts

wiper blades seals

piston rings

    Nylon com Oleo, Tecast L

    The following information corresponds with our current knowledge and indicates our products and possible applications. We cannot give a legally binding guarantee of certain properties or the suitability for a specific application. Existing commercial patents must be observed. A definitive quality guarantee is given in our general conditions of sales. Unless otherwise stated, these values represent averages taken from injection moulding samples. We reserve the right of technical alterations.

Properties Unit Test Method DIN ASTM Dry Wet *
Density g/cm³ 53 479 1.15
Tensile strength at yield MPa 53 455 70
Tensile strength at break MPa 53 455
Elongation at break % 53 455 20 40
Modulus of elasticity in tension MPa 53 457 2500
Modulus of elasticity in flexure MPa 53 457
Ball indentation hardness MPa 53 456 125
Impact strength
kJ/m² 53 453
Creep rupture strength after
100o hrs with static load
Time yield for 1%
elongation after 1000 hrs.
Coefficient of friction against
hardened and ground steel
p = 0,05 N/mm², v = 0,6 m/s
conditions as above
Crystalline melting point °C 53 736 220
Glass transition temperature °C 53 736 40 5
Heat deformation
Method A
Method B
ISO 75
ISO 75
Properties Unit Test Method DIN ASTM Dry Wet *
Max. Working temperature.
short term.
long term
Coefficient of thermal
W/(m . K)
Specific heat J/(g . K)
Coefficient of thermal expansion 10-5/K
Dielectric constant at 105 Hz 53 483
Dielectric loss factor 105 Hz 53 483
Specific volume resistance W . cm 53 482
Surface resistance W 53 482
Dielectric strength 1 mm kV/mm 53 481
Tracking resistance 53 480
Moisture absorption:
Equillibrum in standard atmosphere (23 °C / 50 % relative humidity)
% 53 714
Water absorption at saturation at 23 °C % 53 495 6
Resistance to hot water,
washing soda
limited resistant
Flammability UL 94 HB
Resistance to weathering not resistant

* after storage in a standard 23/50 atmosphere (DIN 50 014) to equilibrium.